Monday, January 31, 2011

Improve RV fuel efficiency--for real

Getting better RV fuel economy almost sounds like a pipe dream. There are so many gadgets, notions, and fuel tank potions that all claim to improve your gas mileage, but so many of them turn out to be no more than gimmicks and do nothing to improve fuel tank economy, unless lightening your wallet gets you better mileage. We've finally found something that does work: Better driving habits, courtesy of Fuel Efficiency Adviser.

Fuel Efficiency Adviser is a computerized gauge system that plugs into your RV (or tow vehicle, or toad) engine computer through it's OBD-2 port. Simply put, slip this gauge system plug into a slot under your dash board and you'll soon have access to information that can help you get better fuel economy--plus a whole lot of other useful information. "Adviser" gives real time feedback as to how many miles-per-gallon your rig is "doing," and puts it in real terms: How much money are you paying to drive at this moment?

Here's how it helps in the "less pain at the pump" department: With the "Adviser" set to give instant feedback on miles-per-gallon, we set out in our "round town" car for a trip over the flat, up hill, down hill, and into mixed city driving. As soon as we started the engine, a digital readout not only tells us how many miles-per-gallon we're getting, it also gives us information on our "average miles per gallon" for the trip, and how much in dollars and cents we're spent. Heading out of town on the freeway, we're working on an upgrade. Will cutting back on the throttle and taking a few minutes more to reach our destination help? Absolutely. By trying to keep our "instant" miles-per-gallon numbers higher than our "trip average miles-per-gallon" the "Adviser" begins to help us develop new driving habits that really do save fuel.

But "Adviser" is more than just a trip computer. A full gauge system can tell you your engine coolant temperature, RPM, battery voltage, ignition timing, throttle position, and for some rigs, manifold pressure, plus a few other things we haven't mentioned. If you're a "gauge geek" "Adviser is a gift from heaven.

Troubled by a "check engine" light? "Adviser" also acts as a scan tool, allowing you to find out just what trouble code has been recorded by your car computer. With a few clicks of your mouse on the Internet, you'll know what the problem is, and if you want, you can clear the trouble code and turn off the check engine light. We've used it on our vehicles, and it can quickly be unplugged and used to check out any other OBD2 equipped vehicle.

Fuel Efficiency Centers (the maker of this device) provided us an evaluation unit. We first installed it in our 1996 Ford tow vehicle, equipped with the PowerStroke diesel. Alas! The 1996 model was the last year before the Feds required diesel pickups to be OB2 compliant. We weren't able to take advantage of the great fuel tracking data, but we did find one of the functions, "Average Speed," quite useful when making long RV road trips. By using our average speed figures, we could quickly estimate time/distance figures and plan for our 'set down point' for the day. The other engine gauge features like coolant temperature were a whole lot more useful than the "dumb gauge" system that Ford set us up with.

Installing the "Adviser' is easy. For us, the hardest part was finding the OBD2 receptacle. In our truck, not a problem--it was under the dash and in relatively clear sight. In our auto, it took considerable grunting and poking to find--until we noticed it just to the right of the driver's knee. Plug in the "Adviser's" plug, route the cable over or under the dash to a convenient point for reading the unit, and the install is done. "Adviser" takes its operating power from the OBD2 system--not batteries to fiddle with. A step-by-step guide allows you to configure in your vehicle's specifics. The first couple of trips to the gas station you'll have zoned in "Adviser" to give you on the mark specifics on fuel economy.

The company will set you up with one from their Internet site for $160. It may take a while to recoup the savings in fuel, but with the prices headed up, it'll soon be less time than ever. Add the other gauge capacity and the scan tool function, you may find Fuel Efficiency Adviser your next RV gadget.

Visit Fuel Efficiency Centers on the Internet at www.fuelefficiencycenters.com.

Thursday, October 07, 2010

Tunebug Vibe brings big sound in small space

With the ever-growing popularity of audio devices like iPods and cell phones with built-in media players, many RVers are joining the ranks of those who download their favorite music and take it with them. Teenagers aren't the only ones seen with their ears stuffed with plastic bugs, engrossed in a world of sound.

But like most everything else that's really good, music is even better when shared. For RVers, sharing the music from your pocket device gets a bit dicier; space is often at a premium, and weight considerations also come into play. It's not always possible to port the iPod into a big sound system and crank the gain. Enter the Vibe from Tunebug.

The Vibe allows you to share audio from your portable devices, music-enhanced cell phones, laptop computers, MP3 players--anything that produces audio through the standard headset jack that's 3.5 mm. Link up your audio player to the Vibe with the included audio cable, and settle the device down on any handy flat surface, turning the surface into a flat projection speaker. What makes the Vibe an attractive bring-along for RVers is its small profile. Scaling in at less than six ounces, it certainly shouldn't tip you over your rig's Net Carrying Capacity. And the Vibe's--how do we describe it--curvaceous triangle profile that's only 2.3" wide by a slim 1" in height will slip in just about any stowage space available.

We wondered about how well Vibe projected sound, and Tunebug provided us an evaluation unit. While theoretically any available flat surface can (and does) provide sound, better quality shines when a hollow surface is used. For us, a "shelf" formed over the area where our rig's propane tanks live gave some of the best sound, easily rivaling our laptop computer speakers--much greater range of sound here. It'll play on a countertop, table, even a TV tray. Short on appropriate surfaces? The Vibe storage box (itself somewhat akin to a work of art) makes a good platform, but we found the sound from the box a little short on bass notes.

While the sound reproduction seemed pretty credible, music lovers may miss the stereophonic quality of multiple speakers. The Vibe does play both left and right music channels, but as a single transducer, it is strictly mono. The Vibe takes it's power on board and stores it in a non-replaceable Lithium Polymer battery that the company says should last for several years. When the battery gets low, the Vibe plugs into any USB port, or you could (as we do) plug it into a USB wall charger.

With a suggested retail of about $70, we also found that by shopping around, you could drop about $10 off the price by shopping on Amazon.

For more info, visit the Tunebug website.

Tuesday, September 07, 2010

Thetford's "Smart Drain" revisited

Back in January we wrote about Thetford's fancy "Smart Drain" holding tank drain hose system. At the time we gave your our initial "feel" for the product, and warned we might come back later after we'd had it a while to give it the real-world test. Warning! Here we are again.

The "Smart Drain" system is built around Thetford's nearly indestructible hose, which lives up to the claims. You can walk on it, drive over it, stretch it, compact it, and leave it lying around, and the thing really does spring back. We've been using ours for several months, and not even the smallest of pinholes has developed. That doesn't mean you'll never face a spill.

To the contrary. Our field testing of the Smart Drain has been done on both a fifth wheel and truck camper, the latter is one of those beasts where the RV drain connector points straight down to the ground, and forces the unfortunate user to basically climb down under the rig for a hookup. Years ago, this writer learned by an unspeakable baptism when you climb under an RV and fiddle with a sewer hose, BAD things can happen. It did to me, thanks to a tricky not-quite-snug bayonet fitting on a sewer hose.

The Thetford system doesn't hook up with a bayonet fitting, but rather, the hose fitting is snugged up against the rig outflow port equipped with a drain valve adapter, which the "SureLock" fitting on the end of the hose couples to, and then with the flip of two plastic lever tabs, providing "reliable, leak proof connections." Ahem. Maybe our SureLock has lost his Dr. Watson, because we've found of late, it's best to lock the tabs down, then quickly open and shut the gray water valve really fast to ensure that the SureLock really is locked, and not leaking. At the last dumping, two or three whacks and trying to ensure a leak proof connection failed. Only after the dirty dumping deed was done, with attendant mess at the station, did we find the station's rise hose was shut down. Really nice for the next bloke in line.

Grumbling under a camper, bumping your head, and trying to figure out why your fitting is leaking isn't the best way to enjoy an RV trip. The rest of the system works as described, but the SureLock locking mechanism may not hold up its end of the bargain. We're looking to see if we can keep that great hose, but go back to bayonet fittings.